MARKETS
|
APF Polyester Fillers
Excellent for all around repairs from Marine grade to aerospace materials to standard mold and autobody repairs
|
Product
|
Description
|
Color
|
Pot-Life
|
Hardness
|
Mix Ratio
|
Cure time
|
Service Temp
|
Data sheets
|
|
APF Light
|
Excellent skim coat filler, light-weight filler, Use as a final coat before primer
|
Lt. grey
|
4-7min
|
72D
|
100:2
|
20min
|
n/a
|
TDS
MSDS
|
|
APF 4
|
Low shrinkage, Excellent body filler, Boeing approved
|
White, Grey, Black
|
6
|
89
|
100:2
|
20
|
285
|
TDS
MSDS
|
|
APF 6
|
Chemical Resistant, No styrene, Great for FRP molds
|
Orange
|
10
|
88
|
100:2
|
30
|
400
|
TDS
MSDS
|
|
APF 7
|
Water and Chemical Resistant, Excellent for marine and aerospace repairs, Boeing approved
|
Black, Grey, White
|
5min
|
88D
|
100:2
|
15min
|
400
|
TDS
MSDS
|
|
APF 77/1
|
Flame retardant, Repair honeycomb, Finish surface of composites parts
|
White
|
5min
|
73D
|
100:2
|
20min
|
444
|
TDS
MSDS
|
|
APF 1700
|
Sprayable, master mold surfacing, preparation or surface repairs
|
Med. Grey
|
25min
|
88D
|
100:2
|
60min
|
400
|
TDS
MSDS
|
|
PMF
|
Ideal patternmakers filler, For mold repairs, Filling pin-holes, Great for large bulk repairs
|
Pale Grey
|
4-7min
|
85D
|
100:2
|
20min
|
N/A
|
TDS
MSDS
|
*Machining time dependant on thickness of application
|
New Axson APF Light and PMF Polyester Fillers

Axson North America, Inc. proudly announces two new polyester repair
filler products. APF Light and PMF is a patternmaker's filler. Both
products fill the gaps between customer needs and other available
lines of polyester fillers. Only the highest grade of raw materials
and fillers has been used in their creation.
APF Light is a hand-applied repair material specially designed for
light, thin-film repairs and skim coatings, finished part repairs,
and other repair applications on metal, fiberglass, polyurethane
tooling board, and wood. The filler properties of APF Light are
desirable for the fairing and coating prior to primer painting done
in body and marine shops. With a four to seven minute working time,
APF Light can be lightly sanded in 20 minutes and ready for primer
in an hour. APF Light is excellent for consumer and industrial applications
and has been tested to meet their requirements.
PMF is designed specifically for the patternmaker to fill voids, repair
over-cuts, make small design changes to molds, and for pattern repairs.
PMF mixes to a smooth consistency, spreads evenly and cures to a hardness
suitable for high quality finishing. With a fast, five minute average
pot-life, PMF is a quick repair material. It is easily mixed with Axson's
BPO hardener and hand-applied. It is excellent for non-metal, industrial
mold applications such as fiberglass, polyurethane tooling boards, and wood patterns.
Axson Technologies is a global leader in specialty resins for the design and prototyping industries. Axson product lines include epoxy, polyurethane and polyester technologies for automotive, aerospace, foundry and marine industries.
|