Michael Engineering / Rook Metering
Axson an innovator in prototyping resins knows quality when it sees
it. So with our high standards in prototyping resins you can guarantee
that if Axson offers equipment it will only be that sames standard
of quality.
Michael Engineering / Rook Metering is that kind quality
equipment that you've come to rely on from Axson.
Our emphasis is on providing our customers easy to use and cost effective
meter/mix equipment. We have a well established track record of providing
high quality MMD equipment, and providing excellent technical support.
Michaels/Rook Engineering
Meter Mixing Equipment
Our meter mix and dispense equipment is designed for long life and minimum maintenance.
Piston type pumps for accurate metering.
Easy slide ratio adjustment, ratios from 3:100 to 1:1 are available.
The right machine for epoxy, urethane, silicone, acrylics, urea-formaldehyde, and PVA.
Full performance, maximum simplicity, minimum price
Sticky Stuff Dispenser Model A
Optional Mixer Manifold Available
Accurately dispenses up to 1 quart of unmixed 2-part resin per minute.
Available in ratios from 100:1 to 100:100
Mixer manifolds, heaters, and other custom options are available.
Handles material viscosities to 7000 centipoise (cps) or more with optional heater
Sticky Stuff Dispenser Model B
Optional Mixer Manifold Available
The Model "B" delivers four times the output per stroke of the model A.
Accurately dispenses up to 2 quarts of unmixed 2-part resin per minute.
Mixer manifolds, heaters, and other custom options are available.
Handles material viscosities to 7000 centipoise (cps) or more with optional heater.
Goo-Grinder
Uses gear pumps and chain drive to accurately meter two part materials.
Ratio range is 1:1 to 6:1. Fixed ratio is easily adjusted by changing drive sprockets.
Options:
Optional shot control
footswitch
static mixer manifolds
air drive
electric drive, and heaters.
One, two, or five gallon reservoirs are available along with drum feed.
Output is up to1.5 quarts per minute, less with more viscus materials.
For non-abrasive materials with viscosities from 300 to 50,000 cps or more with optional heater.
Super E
Air Powered Low Cost Two Part Meter Mix System
For Epoxies, Urethanes, and Silicones
Super E, Shown With Urethane Options.
A break through in both capital cost reduction and operating costs,
the Super E is a simple durable two part meter mix machine that will
handle any self leveling material.
Piston type pumps with hard parts give it long life and resistance to abrasives.
Choose either continuous pulsing flow of three to four pounds per minute or a 5 to 50 cc
single shot with an adjustable stop. Available in ratios from 1:1 to 16:1, ratio is
adjustable over a smaller range.
For use with urethanes optional hoses, iso oilers and desiccant tubes on the
reservoirs are offered as a no cost option.
Shown with Standard 9ft. hoses, gun, and 5 gallon reservoirs.
A simple, yet highly capable, dispensing machine.
Delivers accurately metered material through a static mixer.
Output adjustable from slow and gentle to 1 gallon per minute!
Easy slide ratio adjustment, ratios from 6:100 to 1:1 are available.
Will dispense out of 55-gallon drums, pressure pots or 6-gallon cans.
The base machine is ready to do most jobs, but there are lots of options.
Perfect Flow
Constant Flow, Two Part Metering System
High volume production, tough enough to run for multiple shifts!
Urethane molding and casting quickly fills large molds!
Accurate metering, Dual action, pumps for constant flow!
Resin Infusion, fill large molds or parts without the panic!
Adjustable from a very slow gentle output, up to 27 lbs. per minute!
The right machine for dispensing: Urethane, epoxy, silicone, acrylic, PVA, urea-formaldehyde
Comes preset to your specified volume ratio!
Easy slide ratio adjustment. ratios from 3.5:100 to 1:1!
More powerful then bench top models!
Also effective for casting, mold filling, foam applications, laminating, bent wood, specialty plywood, and finger jointing!
For dispensing silicone from 55-gallon drums,
Capable of dispensing 1 gallon per minute of 10/1 modeling silicone.
Can be equipped for spraying silicone.
Many of these pieces have several options and accessories.
If you would like more information Contact Us through this link.
PRESS RELEASE
Axson North America, Eaton Rapids, Michigan APF Light and PMF Polyester Fillers
Axson North America, Inc. announces two NEW polyester filler range products.
APF Light and PMF (Patternmakers Filler) exceed the high quality standard customers expect from Axson.
APF Light is a light thin-film coating for molds, patterns and repair applications.
APF Light is ideal for use as a skim and final preparation coating prior to painting.
The filler properties are desirable for repair in body and marine shops for fairing and
coating prior to the finish coating.
PMF is designed for the patternmaker to fill voids, repair over cuts and design
changes to molds and patterns. PMF mixes to a smooth consistency, spreads evenly
and cures to a hardness allowing for high quality finishing.
For more information on the NEW APF Light and PMF and all other quality polyester
fillers, prototyping polyurethane and epoxy resin systems, please contact us
at 800-365-8191 or at info@axson-na.com.
